/* 以太网配置 */ ethmac: ethernet@c9410000 { compatible = "amlogic,meson-gx-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; phy-mode = "rmii"; phy-handle = <&eth_phy0>; snps,reset-gpio = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; snps,reset-delays-us = <0 10000 1000000>;
mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>;
eth_phy0: ethernet-phy@0 { reg = <0>; max-speed = <100>; }; }; };
/* Wi-Fi 模块（RTL8189FTV） */ sdio_wifi: wifi@d0070000 { compatible = "amlogic,meson-gx-mmc"; reg = <0x0 0xd0070000 0x0 0x800>; interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; brcmf: brcmf { compatible = "realtek,rtl8189ftv"; interrupt-parent = <&gpio_intc>; interrupts = <GPIOAO_10 IRQ_TYPE_LEVEL_HIGH>; }; };
/* 红外接收器 */ ir: ir@c8100580 { compatible = "amlogic,meson-gx-ir"; reg = <0x0 0xc8100580 0x0 0x40>; interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; linux,rc-map-name = "rc-langchao-ipbs9506"; };
/* UART 调试接口 */ uart_AO: serial@c81004c0 { compatible = "amlogic,meson-gx-uart"; reg = <0x0 0xc81004c0 0x0 0x14>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>; status = "okay"; };
/* HDMI 输出 */ hdmi_tx: hdmi-tx@c883a000 { compatible = "amlogic,meson-gxl-dw-hdmi"; reg = <0x0 0xc883a000 0x0 0x1c>; interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; status = "okay"; };};
&usb0 { status = "okay"; dr_mode = "host";};
&sd_emmc_a { status = "okay"; bus-width = <4>; max-frequency = <100000000>;};```
#### 2. **编译为 DTB 文件**```bashdtc -I dts -O dtb -o 网页链接 ipbs9506.dts```
#### 3. **重命名为 `.img` 格式**```bashmv 网页链接 dtb.img``

当然我不知道它写的对不对，只是提供个思路，deepseek百度搜索可以直接下载